Stainless Steel Compressed Air Diaphragm Pump , Small Air Operated
Pneumatic Pump
Compressed Air Diaphragm Pump introduction
Compressed Air Diaphragm Pump is a new type of pump developed in
China.Using compressed air as the power source, all kinds of
corrosive liquids, granular liquids, high viscosity, volatile,
inflammable, highly toxic liquids can be exhausted by light
absorption.
Corrosion resistance high temperature resistance high pressure
strong suction easy installation,No noise, no sparks.
| 1 | Ceramic material for main valve and reversing valve ensures longer
life, more stability and working in dirty compressed air ( most
occasions, air filter become option). |
| 2 | Without ice with the muffler. Innovative design with the exhaust
space of the pump, some of muffler inside, this makes the air
outlet smooth.) |
| 3 | Outward parts of the pump are all die casted aluminum and special
environment-protected painting, makes the pump with elegant
appearance. |
| 4 | Large flow capacity. Innovative design of chamber maximizes the
flow capacity. Seamless adjustment with inlet valve, or even close
the valve, without damaging the pump. |
| 5 | Low consumption compressed air. Innovative design of the air flow
system, minimizes the usage of compressed air to achieve maximum
performance. |
| 6 | Light and small size, movable. |
| 7 | Modularization of main valve and air motor. No broken, easy to
disassemble and repair. |
| 8 | Optimized design greatly reduces overall component number of pump.
Significantly improve performance, help for maintenance. |
| 9 | Innovated design of sealing structure and material, totally solve
the leakage inside or outside. |
| 10 | BSK pump can be started with low air press ( only 1.5 KG air press
can start BSK pump). |
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ·············································40°- 150°F
(4.4- 65.5°C)
Santoprene·······································-40°- 225°F (-40°-
107.2°C) ··············································40°- 220°F
(4.4°- 104°C)
Nitrile···············································10°- 180°F
(-12°- 82°C)
Viton················································-40°- 350°F
(-40°-176.6°C)
Hytrel················································-20°-150°F
(-12°- 93°C)
Kynar················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene······································32°- 175°F
(0-79.4°C)
